Tray Dryers

SKU: NSW 154 Categories: ,

These ovens are suitable for removing moisture from plastic granules, epoxy potting, organic/ inorganic pulp, roasting / drying of food products like dry fruits, corn flakes and other edible products. The product is placed inside the oven on the trays for the drying, curing or the roasting process. The temperature ranges from a few degrees above the ambient temperature to 200 degree C. The sizes range from 6 Trays to 288 Trays. Each tray of 400 x 800 MM is capable of carrying approximately 4 – 5 kg’s of material to be processed. The panel can be mounted on the side or on the top of the oven depending on your requirement. Insulation of 100 MM is provided to minimize the heat losses during operation.

SEND ENQUIRY

Description

  • Construction: The oven is made out of mild steel from inside & outside and insulated with 100 mm of mineral bonded wool. It is painted with High Temperature aluminum paint from inside and given rich enamel finish from outside. Oven can also be made in Galvanized / Stainless steel on request.
  • Choice of Air circulation: Vertical, horizontal or combination 
  • Trays of size 800 x 400 x 30mm will be provided along with the oven. The trays are made out of aluminum 1.2 mm thk. Sheets, Stainless or G.I. Trays are also available on request.
  • Exhaust vent with manually adjustable damper.
  • Heating media: Electric / Gas / Diesel
  • Control panel with Standard Controls
  • Voltage Stabilizer: in case of gas/diesel fired heating system

 

MODEL DIMENSION (MM) NO. OF TRAYS NO. OF TROLLEY
DEPTH WIDTH HEIGHT
TD-6 840 430 540 6
TD-12 840 430 915 12
TD-24 840 915 915 24
TD-48 825 1425 1425 48 1
TD-96 1650 1425 1425 96 2
TD-192 3500 1425 1425 192 4
TD-288 5150 1425 1425 288 6
  • Temperature control: PID with or without temp. Profiling (ramp & soak) can be provided with SSR / SCR for optimum accuracy. The programming of PID can vary from 4 programmes to 99 programmes.
  • Temperature Recorder: Microprocessor based, strip chart or paper less, Multi-point Temp. Indicator cum Recorder \ Digital Timer, with / without buzzer, to turn off the oven at the end of cycle time at the set temperature
  • Heater Failure Indicator: Particular heater can be easily identified whether it is in working condition or not. If damaged can be easily replaced in very short span.
  • PLC With HMI / MMI: PLC can be provided for automation and integration of whole system, data feeding, process display and fault indication can be seen in MMI.
  • SCADA System: High quality integration and controlling from one point can be done with SCADA.
  • Exhaust: Automatic forced exhaust system with fresh air inlet.
  • Door switch: Door interlocking system will switch off the blower and the heating system if the oven doors are open.
  • Automatic door: for better space management and to automise the door opening and closing process, vertical/horizontal sliding door arrangement can be provided.
  • Shelf: Additional shelves can be provided.
  • Trolley: Additional trolley can be provided.
  • Stand: for the smaller size ovens