Inert Atmosphere Ovens

    Inert Atmosphere Ovens

    SKU: NSW 175 Categories: ,

    This is an oven where in treatment of the products is done in presence of an inert Gas (Nitrogen) for preventing any oxidation at the surface of the products.

    The heating is provided through heating elements. The specially designed lock and doors ensure any leakage from the oven.

    The oven is fitted with rota-meters, valves and other necessary controls & items.

    SEND ENQUIRY

    Description

    • Construction: The oven is made out of mild steel/ stainless/ G.I sheets from outside and fully welded stainless sheet from inside. The oven is duly painted with Enamel Paint from outside incase of mild steel sheets.
    • Choice of Air circulation: Horizontal
    • Heating media: Electric / Gas / Diesel
      Control panel with Standard Controls
    • Voltage Stabilizer: in case of gas/diesel fired heating systems

     

    MODEL DIMENSION (MM) VOLUME
    DEPTH WIDTH HEIGHT Cu.Mt. Cu.Ft.
    ING-1 600 600 600 0.22 7.67
    ING-2 600 600 900 0.32 11.5
    ING-3 900 900 900 0.73 25.88
    ING-4 900 900 1200 0.97 34.51

     

    • Temperature control: PID with or without temp. Profiling (ramp & soak) can be provided with SSR/ SCR for optimum accuracy. The programming of PID can vary from 4 programmes to 99 programmes.
    • Temperature Recorder: Microprocessor based, strip chart or paper less, Multi-point Temp. Indicator cum Recorder \ Digital Timer, with / without buzzer, to turn off the oven at the end of cycle time at the set temperature.
    • Heater Failure Indicator: Particular heater can be easily identified whether it is in working condition or not. If damaged can be easily replaced in very short span.
    • PLC With HMI / MMI: PLC can be provided for automation and integration of whole system, data feeding, process display and fault indication can be seen in MMI.
    • SCADA System: High quality integration and controlling from one point can be done with SCADA.
    • Exhaust: Automatic forced exhaust system with fresh air inlet.
    • Door switch: Door interlocking system will switch off the blower and the heating system if the oven doors are open.
    • Automatic door: for better space management and to automise the door opening and closing process, vertical/horizontal sliding door arrangement can be provided.
    • Shelf: Additional shelves can be provided.
    • Trolley: Additional trolley can be provided.
    • Stand: for the smaller size ovens

    Related products

    High Temperature Ovens

    High Temperature Ovens

    These ovens are specially engineered to operate on exceptionally high temperatures up to 550 degree C with high uniformity. They are suitably design for continuous, long rugged use applications. These ovens are accompanied with shelves on which the product is placed inside the oven for annealing, tempering, baking of non stick coatings, metals, knives, moulds, etc. The sizes range from 3 cub ft. to 64 cub ft. The control panel is mounted on right hand side of the oven. The walls of oven are insulated with super quality mineral wool as heat insulator to minimize the heat losses. Depending upon the temperature range is the thickness varies from 150 MM to 250MM.

    SEND ENQUIRY

    MORE INFO
    Disc Rotary Oven

    Disc Rotary Oven

    These ovens are incorporated with round discs, which rotate with the help of a drive unit. An automatic pneumatic door with timer/sensor is provided to close/open the door after a specified time to minimize the heat losses during loading & unloading of material on to the disc. The disc carrying these products rotates inside the oven and after completing the cycle time the products and remove from the oven. These discs can be in many layers one over the other as per the need/requirement. The top of disc is either metallic or non metallic depending on the product to be processed. The rotation is intermittent or can be variable in case of continuous movement. These kind of systems are very useful for smaller product and save a lot of space & power.

    SEND ENQUIRY

    MORE INFO
    Monorail Overhead Conveyor Oven

    Monorail Overhead Conveyor Oven

    The jobs are hanged at a comfortable height through hangers on the conveyor to pass through tunnel type oven. The conveyor can be chosen from 3 wheel with T-track, 4 wheel conveyor or I beam conveyor. The jigs / fixture are designed for product to product and NSW reveal its expertise for the same. The oven is supplied with oil fired heat exchanger and high power blower. The system can also be provided with electrical heating elements and temperature variation from zone to zone.

    SEND ENQUIRY

    MORE INFO